Universal Versalaser.jpg

Universal Laser Systems machine service and repair.

With over 15 years combined experience servicing Universal Laser Systems based in Maidstone, South East England, Kent Lasers has become a trusted service provider for the Universal range of laser cutting and engraving systems.


Across the range from entry-level VersaLaser VLS2.30 and VLS3.60 systems, right up to the VLS platform and PLS (Professional) machines, we can offer quality of service (that has been traditionally reserved for main dealers) with unbeatable pricing.

 

Each Universal laser cutter repair is undertaken with pride and attention-to detail, leaving your machinery performing as good as new! We have serviced hundreds of these machines, providing routine repairs, optical re-alignment, complex fault finding and complete strip-downs; a system can be made to look, and perform like new, with your total satisfaction guaranteed.

If your Universal Laser cutter is low on power Kent Lasers can also offer repair and refurbishment of your air cooled metal laser tube.

 

We operate a no fix - no fee service, with dozens of successful repairs undertaken. If you notice a drop off in power whilst cutting, or your materials database settings can no longer process jobs as when the system was new we can help!

 

Our technicians are highly experienced with Universal Laser Systems machines, Providing quality service by fully trained engineers. We can offer repair and service costs lower than our competitors, whilst maintaining truly unbeatable quality.

If your air-cooled laser tube is low on power, or struggles to keep up after running for a short time, we can help re-gas, refill or replace your laser cartridge. Our own brand of replacement air cooled laser cartridge can also be supplied with 24 month warranty! 

Universal Laser Refill.jpg

A typical service performed by Kent Lasers can be found here! 

Honeycomb laser bed.webp
ZnSe Lens.webp

If you are looking for Universal 2.0 lens ULS Honeycomb cutting table Universal VLS servicing PLS laser service laser tube refill or any other associated part then please get in touch to discuss your needs.

We can also offer support for various Universal Laser Systems models including VL series, Legacy Series, X600, X660 Versa Laser VLS4.60 VLS3.50 VLS6.60 VLS6.75 Professional Series PLS4.75 and other systems/specifications as required.

*Immediate/24-hour call-out is offered where available.
ULR-30
leadscrews
optic air diffuser
power test
Universal Laser Systems
ULS12
x axis belt tensioning
x axis airline guide

Our Repairs:

Laser cartridge re-fill recharge and replacement

Universal tube recharge.jpg

Kent Lasers are now proud to offer our own range of aftermarket RF metal tube air cooled laser! Designed and produced to our own standards these tubes are available in 10W 20W and 30W models and can be fitted into your Universal Laser cutter with a supplied conversion kit.

This is an ideal solution for older ULS equipment, where the cost of universal laser tube recharge is prohibitive. For less than the cost of a regas or recharge Kent Lasers can fit a brand new laser unit with 24 month warranty which is guaranteed to provide high output power and excellent materials processing capability. A mechanical fixing kit and conversion cable is included with every tube. Your machine also retains its power supplies and mirrors/lenses!

Each tube is supplied with fitting, full optical re-alignment, calibration and full service of your machine included in the cost!

Please contact us for a quotation or to discuss any aspect of this service!

Replacement laser tube manufactured by Kent Lasers fitted to a VLS model laser cutter.

Part exchange of your existing equipment.

Kent Lasers manufacture its entire product range in the UK undertaking extensive development providing UK laser cutter for schools and industry. If you have an older Universal machine, that is low on power and also has wear and/or faults in other areas, it may not be possible to economically repair. In this case we can offer excellent trade-in value against a brand new system. Our range of equipment typically offers higher output power, giving you the capability to process thicker materials and set up more complex jobs offering the best possible cutting and engraving quality. Our range is easy to use, meaning you can still produce excellent quality work with easy set-up and work flow.  

We would be happy to discuss your requirements and offer unbiased advice regarding any aspect of equipment repair and servicing.

UL-30 UL-40 UL-50 Recharge, Re gas and Re fill

The Universal range of laser cutting machines run on an old design of laser tube which is a proprietary system developed by Universal Laser Systems. This makes the cost of re-fill unacceptably high when your machine becomes low on power. This is a problem, especially on older machines, where the cost of re-filling the laser tube can exceed the value of equipment. Fortunately Kent Lasers can offer discounted servicing of your laser cartridge with the following costs:

  • UL-30 Molex and Positronic £1497.00+VAT

  • UL-40 Molex and Positronic £1785.00+VAT

  • UL-50 Molex and Positronic £1998.00+VAT

 

We guarantee each re-fill for 12 months. Each repair is different, but generally takes 2-3 weeks to complete, we have a selection of tubes off-the-shelf that can be loaned if you have urgent works to undertake.

 

Please contact us to discuss your requirements.